Digital Printing
Films Reinforced Adhesive
PRINTABLE POLYMERIC FILM
Ultra reinforced adhesive
- The specific adhesive of the HXUR280WG2 provides powerful, immediate adhesion on contact with a structured surface, without causing any noticeable deformation to the printed film.
- The HEX’Press liner allows air to be released and the film to be repositioned accurately, making the application even easier, without creases or bubbles.
Kleurenwaaier & referenties
Kenmerken van de reeks
Need a film with very strong immediate long-term adhesion?
No signage project on difficult surfaces will resist it!
Due to the unique properties of its ultra reinforced adhesive, the printable film HXUR280WG2 is ideal for turning any complex surface into a visual communication media.
This film can be applied to all types of rough, porous or low-energy substrates such as polypropylene. It adheres perfectly to most bituminous or masonry substrates, such as tar, brick, building blocks, plaster, plasterboard, concrete etc.
Verwerking
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
Technische eigenschappen
| Rek bij breuk | min. 100 % |
| Brandgedrag | EN 13501-1 |
Polymeric, calendered PVC
Ultra reinforced permanent adhesive
100-μm thickness
HEX’PRESS liner for easy application
Indoor & outdoor installation
Compatible inks: ECO-S, SOLV, LATEX, UV
Durability / Unprinted film: up to 8 years for outdoor use (vertical exposure)
Durability / Printed and laminated film: up to 5 years for outdoor use (vertical exposure)
Available in 1370 mm × 40 m (other retail options are possible, depending on stock availability)
Tarieven & bestellen
Log in op uw klantenportaal voor de professionele tarieven.