White
Films composed of a 100-µm, calendered, monomeric PVC, which is coated with a permanent pressure-sensitive acrylic adhesive, suitable for adhesion to low energy surfaces. For solvent, eco-solvent, latex and UV inkjet printing. Glossy (VCSR301WG1), matt (VCSR301WM1) or satin (VCSR301WS1) surface finish.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 100 µm |
| Kleeflaag | clear |
| Liner | Liner PE |
| Breedte (mm) | 1050,1370,1600 |
| Lengte (m) | 45 |
Verwerking
| Toepassing | interior decoration |
| Ondergronden | windows, signage, walls |
| Oppervlakken | textured – low-energy |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | promotional |
Technische eigenschappen
| Tack | 31 N/25 mm |
| Hechting (20 min) | 30 N/25 mm |
| Hechting (24 h) | 33 N/25 mm |
| Afpelkracht liner | 0.1 N/25 mm |
| Treksterkte | min. 40 N/25 mm |
| Krimp (168 h / 70 °C) | < 1 mm |
Toepassing & onderhoud
Due to the wide variety of existing substrates, the application of film to an unsuitable and/or not adequately prepared surface or coating may result in media lifting from the substrate or damage to the substrate when the film is removed. The application and removal of the film are at the judgement and risk of the installer. HEXIS will not, under any circumstances, be liable for any damages or deteriorations caused by the installation or removal of a vinyl film.
- In the case of an already painted substrate, apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- The surface finish of your printings may be modified/improved/protected by applying the appropriate laminate: V700 or V650. For UV printings, use the protective VCR650 laminate.
Duurzaamheid in detail
- Vertical outdoor exposure on flat surfaces:
Unprinted: 4 years.
