White

Due to the wide variety of existing substrates, the application of film to an unsuitable and/or not adequately prepared surface or coating may result in media lifting from the substrate or damage to the substrate or existing laminate when the film is removed. The application and removal of the film are at the judgement and risk of the installer. HEXIS will not, under any circumstances, be liable for any damages or deteriorations caused by the installation or removal of a vinyl film.

• Very good adhesion to glass, steel, aluminium, PVC, melamine, smooth or slightly textured surfaces (such as Placoplatre^® type BA13, etc.), except grain, chalky, damaged substrates (having cracks, holes, humidity or condensation spots, excess of texture, etc.), or those coated with acrylic paint, etc.
• Due to the wide variety of existing substrates, a preliminary tear-off test must be carried out on a small inconspicuous surface of the substrate using a small piece of film.

If necessary, refurbish the substrate or existing coating before applying the film.

• Carry out a degassing test on freshly painted surfaces before applying any film.

A drying time of 7-10 days may be necessary before proceeding with the film application. The degassing of a non-dried paint can lead to lifting, bubbles and tearing of the film.

Aanbevelingen

• The colour of the films is controlled by HEXIS in order to ensure faithful reproduction of their colour tints. Nevertheless, in the case that your project requires the use of several rolls, HEXIS recommend using only a single batch number of each reference.
• The surface finish of your printings may be modified/improved/protected by applying the appropriate laminate: V750 or PC500. For UV printings, use the protective VCR750 laminate.

• Vertical outdoor exposure:
  Unprinted: 8 years.
  Printed and laminated:
  - PC500: 5 years,
  - V750: 4 years.
  - VCR750: 3 years.
  Printed: 2 years.