White
PRINTABLE POLYMERIC FILM
Ultra reinforced adhesive
Film composed of 100-µm calendered, polymeric PVC, which is coated with a pressure-sensitive, ultra-reinforced acrylic adhesive. The physical and chemical distribution properties of the adhesive allow an increase of the contact surface between the film and the relief surface of structured or rough substrates. Also, the constraints to be exerted on the film in order to deform it are reduced. The adhesive is micro-structured for faster application and air evacuation. For solvent, eco-solvent, latex and UV inkjet printing. It has a glossy surface finish.
- The specific adhesive of the HXUR280WG2 provides powerful, immediate adhesion on contact with a structured surface, without causing any noticeable deformation to the printed film.
- The HEX’Press liner allows air to be released and the film to be repositioned accurately, making the application even easier, without creases or bubbles.
Presentatie
Need a film with very strong immediate long-term adhesion?
No signage project on difficult surfaces will resist it!
Due to the unique properties of its ultra reinforced adhesive, the printable film HXUR280WG2 is ideal for turning any complex surface into a visual communication media.
This film can be applied to all types of rough, porous or low-energy substrates such as polypropylene. It adheres perfectly to most bituminous or masonry substrates, such as tar, brick, building blocks, plaster, plasterboard, concrete etc.
Samenstelling & formaat
| Filmtype | polymeric PVC |
| Dikte | 100 µm |
| Kleeflaag | clear |
| Liner | Liner HEX'Press |
| Breedte (mm) | 1370 |
| Lengte (m) | 40 |
Verwerking
| Oppervlakken | textured – low-energy |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Tack | 31 N/25 mm |
| Hechting (20 min) | 38 N/25 mm |
| Hechting (24 h) | 39 N/25 mm |
| Afpelkracht liner | 0.5 N/25 mm |
| Treksterkte | min. 35 N/25 mm |
| Rek bij breuk | min. 100 % |
| Krimp (168 h / 70 °C) | < 1 mm |
Het product
Polymeric, calendered PVC
Ultra reinforced permanent adhesive
100-μm thickness
HEX’PRESS liner for easy application
Indoor & outdoor installation
Compatible inks: ECO-S, SOLV, LATEX, UV
Durability / Unprinted film: up to 8 years for outdoor use (vertical exposure)
Durability / Printed and laminated film: up to 5 years for outdoor use (vertical exposure)
Available in 1370 mm × 40 m (other retail options are possible, depending on stock availability)
Toepassing & onderhoud
Due to the wide variety of existing substrates, the application of film to an unsuitable and/or not adequately prepared surface or coating may result in media lifting from the substrate or damage to the substrate when the film is removed. The application and removal of the film are at the judgement and risk of the installer. HEXIS will not, under any circumstances, be liable for any damages or deteriorations caused by the installation or removal of a vinyl film.
- For application to irregular surfaces, the substrate must be cleared of all traces of dust to ensure optimum adhesion of the film.
- In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
If necessary, refurbish the substrate or existing laminate before applying the vinyl. A drying time of 7-10 days may be needed before proceeding with the film application. The degassing of a non-dried paint can lead to lifting, bubbles and tearing of the film.
Aanbevelingen
- The surface finish of the printings may be modified/improved/protected by applying the appropriate laminate: V750 or PC500. For UV printings, use the protective VCR750 laminate.
Duurzaamheid in detail
- Vertical outdoor exposure:
Unprinted: up to 8 years.
Printed and laminated:
- PC500: up to 5 years,
- V750: up to 4 years,
- VCR750: up to 3 years.
Printed: up to 2 years.
