CFS502

Extrem Violet

Paint Protection Films

gloss 1520 mm 15 m long term polyurethane PU

This PPF range is composed of self-healing, coloured, flexible, polyurethane-based, multi-layered films, which are coated with a pressure-sensitive acrylic adhesive. These films are designed for the decoration and protection of vehicles. They protect the door sills, bodywork and painted plastic parts (bumpers, rear-view mirror casings, etc.) from scratches, chips caused by stones, insect stains, contact with car doors and washing brushes. Glossy surface finish.

Samenstelling & formaat

Filmtype	polyurethane PU
Kleeflaag	clear
Liner	Liner PET
Breedte (mm)	1520
Lengte (m)	15

Verwerking

Toepassing	vehicle protection and customization
Ondergronden	vehicles
Oppervlakken	concave and convex
Aanbrengmethode	Dry application method
Minimale aanbrengtemperatuur	+10 °C (+50 °F)
Gebruiksbereik	-40 °C to +90 °C (-40 °F to +194 °F)
Duurzaamheid	long term

Technische eigenschappen

Tack	≥ 12 N/25 mm
Hechting (20 min)	≥ 8 N/25 mm
Hechting (24 h)	≥ 12 N/25 mm
Afpelkracht liner	0.2 N/25 mm
Treksterkte	> 100 N/25 mm
Rek bij breuk	> 150 %
Krimp (168 h / 70 °C)	< 0.2 mm

Toepassing & onderhoud

The CANDYFENCE film range is intended for partial or full wrapping of vehicle car bodies and offers at the same time effective protection.
The surface protection film must be removed before CANDYFENCE is processed (cutting with the plotter or film application).
Cut the film to the size of the part to be wrapped, allowing +10 cm (4 in.) of extra margin.

The remaining film must be stored on its original core (do not cut the rolls into several lengths or widths, do not repackage the product); the roll must be closed immediately and properly protected (masking tape or roll-collars) after use in order to preserve all its qualities.

Apply to a surface that is clean and free from any traces of contaminants (dust, grease, wax, silicone, etc.).

Particular care must be taken to clean the angles and periphery of the target surfaces in order to enable the film to adhere properly to the surface.

In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
In the case of superficial micro-scratches, the film is able to eliminate these scratch marks when the temperature ranges from 45 °C to 70 °C (from 113 °F to 158 °F) maximum. For this purpose, heat must be applied using a heat gun to activate the self-healing power of the film.

Aanbevelingen

For more information on the application method of the films of the CANDYFENCE range, please refer to the Application Guide on the "Professionals" pages, category "Solar and safety films" on our site www.hexis-graphics.com.

Duurzaamheid in detail

Vertical exposure, Central European climate:
up to 10 years (under normal road use conditions).

Lifespan depends on the type of substrate, its preparation, exposure conditions and nature and frequency of the cleaning.

For instance, it is estimated that a south-facing exposure will divide the durability by two. The same applies to a horizontal exposure. In addition, elevated temperatures (above +50 °C) (+122 °F) or pollution significantly reduce this durability.