Black

Paint Protection Films

PAINT PROTECTION FILM
CHOOSE 100% BLACK PROTECTION!

matt 1520 mm 20 m

BFBLACKM is a black, satin-matt adhesive-coated film, which is self-healing at ambient temperature and specially developed for protecting a car's bodywork. Its excellent shock-absorbing properties protect your bodywork against marks caused by stone chips, car doors, insect stains, scratches from washing brushes, etc.

Whether it is to cover a roof or for a full wrap, our black protection films combine the aesthetics of a deep black with the protection of our BODYFENCE range.

Presentatie

New legislation requires manufacturers to use water-based paints for greater environmental compliance.

These paints are less hard on the surface and are more sensitive to scratches and impacts. BODYFENCE paint protection film is designed to provide long-lasting protection for your vehicle bodywork.

Due to its shock-absorbing, self-healing and high sliding properties, BODYFENCE protective film is the ideal protection.

ANTI CHIPPING
SELF HEALING
SELF CLEANING
ULTRA CLEAR

Samenstelling & formaat

Breedte (mm)	1520
Lengte (m)	20

Verwerking

Aanbrengmethode	Wet application method
Minimale aanbrengtemperatuur	+10 °C (+50 °F)
Gebruiksbereik	-40 °C to +90 °C (-40 °F to +194 °F)

Technische eigenschappen

Tack	11 N/25 mm
Hechting (20 min)	15 N/25 mm
Hechting (24 h)	16 N/25 mm
Afpelkracht liner	0.1 N/25 mm
Treksterkte	> 100 N/25 mm
Krimp (168 h / 70 °C)	< 0.2 mm

Het product

X TECHNOLOGY
PHENOMENAL AND REVOLUTIONARY
Immediate self-healing: incredible ability to self-heal
Increased resistance to hydrocarbon stains
Improved hydrophobic effect
Enhanced « deep » effect
High durability
180μm / 7mil
Black opaque finish

Toepassing & onderhoud

Self-healing properties of the film at ambient temperatures: This phenomenon of reabsorbing scratches accelerates especially as the temperature increases.

Cut the film to the size of the part to be wrapped, allowing +10 cm (4 in.) of extra margin.

The remaining film must be stored on its original core (do not cut the rolls into several lengths or widths, do not repackage the product); the roll must be closed immediately and properly protected (masking tape or roll-collars) after use in order to preserve all its qualities.

Apply to a surface that is clean and free from any traces of contaminants (dust, grease, wax, silicone, etc.).

Particular care must be taken to clean the angles and periphery of the target surfaces in order to enable the film to adhere properly to the surface.

In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.

Aanbevelingen

Conformable product developed for protecting bodywork, underbody, painted bumpers and rear-view mirror casings against chips caused by stones, insects and scratches.
Excellent protection against vandalism (key scratches).
To facilitate application, HEXIS have several types of squeegees in their range of accessories, ranging from soft to hard (plastic or felt).
For more information on the application method of BFBLACKM, please refer to the Application Guide on the "Professionals" pages, category "Solar and safety films" on our site www.hexis-graphics.com.

Duurzaamheid in detail

Vertical exposure: up to 7 years.
Horizontal exposure: up to 3 years.

Lifespan depends on the type of substrate, its preparation, exposure conditions and nature and frequency of the cleaning.

For instance, it is estimated that a south-facing exposure (in the northern hemisphere) will divide the durability by two. The same applies to a horizontal exposure. In addition, elevated temperatures (above +50 °C) (+122 °F) or pollution significantly reduce this durability.