BFBLACK

black

Paint Protection Films

PAINT PROTECTION FILM
CHOOSE 100% BLACK PROTECTION!

gloss 1520 mm 20 m long term polyurethane PU

BFBLACK is a glossy, black, adhesive-coated film, which is self-healing at ambient temperature and specially developed for protecting a car's bodywork. Its excellent shock-absorbing properties protect your bodywork against marks caused by stone chips, car doors, insect stains, scratches from washing brushes, etc. Glossy surface finish.

Whether it is to cover a roof or for a full wrap, our black protection films combine the aesthetics of a deep black with the protection of our BODYFENCE range.

Presentatie

New legislation requires manufacturers to use water-based paints for greater environmental compliance.

These paints are less hard on the surface and are more sensitive to scratches and impacts. BODYFENCE paint protection film is designed to provide long-lasting protection for your vehicle bodywork.

Due to its shock-absorbing, self-healing and high sliding properties, BODYFENCE protective film is the ideal protection.

ANTI CHIPPING
SELF HEALING
SELF CLEANING
ULTRA CLEAR

Samenstelling & formaat

Filmtype	polyurethane PU
Kleeflaag	clear
Liner	Liner PET
Breedte (mm)	1520
Lengte (m)	20

Verwerking

Ondergronden	vehicles
Oppervlakken	concave and convex
Aanbrengmethode	Wet application method
Minimale aanbrengtemperatuur	+10 °C (+50 °F)
Gebruiksbereik	-40 °C to +90 °C (-40 °F to +194 °F)
Duurzaamheid	long term

Technische eigenschappen

Tack	11 N/25 mm
Hechting (20 min)	15 N/25 mm
Hechting (24 h)	16 N/25 mm
Afpelkracht liner	0.1 N/25 mm
Treksterkte	> 100 N/25 mm
Krimp (168 h / 70 °C)	< 0.2 mm

Het product

X TECHNOLOGY
180μm / 7mil
Black opaque finish

Toepassing & onderhoud

Self-healing properties of the film at ambient temperatures: This phenomenon of reabsorbing scratches accelerates especially as the temperature increases.

Cut the film to the size of the part to be wrapped, allowing +10 cm.

The remaining film must be stored on its original core (do not cut the rolls into several lengths or widths, do not repackage the product); the roll must be closed immediately and properly (masking tape or roll-collars) after use in order to preserve all its qualities.

Apply to a surface that is clean and free from any traces of contaminants (dust, grease, wax, silicone, etc.).

Particular care must be taken to clean the angles and periphery of the glass surfaces in order to enable the film to adhere properly to the surface.

In the case of an already painted substrate, apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.

Aanbevelingen

Conformable product developed for protecting bodywork, underbody, painted bumpers and rear-view mirror casings against chips caused by stones, insects and scratches.
Excellent protection against vandalism (key scratches).
To facilitate application, HEXIS have several types of squeegees in their range of accessories, ranging from softer to harder (plastic or felt).
For more information on the application method of the BFBLACK film, please refer to its Application Guide available under the "Professionals" heading, in the "Solar and safety films” category on our website www.hexis-graphics.com.

Duurzaamheid in detail

Vertical exposure: up to 7 years.
Horizontal exposure: up to 3 years

Lifespan depends on the type of substrate, substrate preparation, exposure conditions and nature and frequency of the cleaning.

For instance, it is estimated that a south-facing exposure (in the northern hemisphere) will divide the durability by two. The same applies to a horizontal exposure. In addition, elevated temperatures (above +50 °C) (+122 °F) or pollution significantly reduce this durability.