Black Carbon

Paint Protection Films

CANDYFENCE VISUALLY APPEALING PROTECTION FILMS
FULL-COLOUR PROTECTION!

gloss 1520 mm 15 m long term Automotive protection film

The PPF range is composed of multi-layered, coloured, self-healing adhesive films, specially designed for decorating and protecting a car’s bodywork. Their excellent shock-absorbing properties protect your bodywork against chips caused by stones, insects, car doors, washing brushes, etc. Improved surface sliding. They have a glossy surface finish.

ULTRA-SMOOTH SURFACE (IMPROVED SLIDING PROPERTIES, LESS FREQUENT CLEANING)
CONFORMABLE
DRY APPLICATION
ANTI-SCHOCK
SELF-HEALING

Presentatie

The art of carbon, the power of protection.

The combination of elegance and robustness for uncompromising
protection of your bodywork.

WHY SHOULD YOU CHOOSE CF001?
Acts as a true barrier against day-to-day damage (gravel, insects, car wash brushes, doors ding etc.).
Gives your car a modern, dynamic and sporting look, in full or partial wrap (roof, wings, mirrors, bonnet etc.).

Samenstelling & formaat

Filmtype	Automotive protection film
Kleeflaag	clear
Liner	Liner HEX'Press
Breedte (mm)	1520
Lengte (m)	15

Verwerking

Toepassing	vehicle protection
Ondergronden	vehicles
Oppervlakken	concave and convex
Aanbrengmethode	Dry application method
Minimale aanbrengtemperatuur	+10 °C (+50 °F)
Gebruiksbereik	-40 °C to +90 °C (-40 °F to +194 °F)
Duurzaamheid	long term

Technische eigenschappen

Tack	≥ 12 N/25 mm
Hechting (20 min)	≥ 8 N/25 mm
Hechting (24 h)	≥ 12 N/25 mm
Afpelkracht liner	0.2 N/25 mm
Treksterkte	> 100 N/25 mm
Rek bij breuk	> 150 %
Krimp (168 h / 70 °C)	< 0.2 mm

Het product

MULTI-LAYERED FILM, CARBON FIBRE 3D PATTERN
GLOSS FINISH
SOLVENT-BASED ACRYLIC ADHESIVE
PET LINER
SURFACE PROTECTOR
Thickness: 195μm (7,6mils)
Durability vertical exposure: up to 10 years
Available in: 1520mm (60in) X 15m (50ft)

Toepassing & onderhoud

The CANDYFENCE film range is intended for partial or full wrapping of vehicle car bodies and offers at the same time effective protection.
The surface protection film must be removed before CANDYFENCE is processed (cutting with the plotter or film application).
Cut the film to the size of the part to be wrapped, allowing +10 cm (4 in.) of extra margin.

The remaining film must be stored on its original core (do not cut the rolls into several lengths or widths, do not repackage the product); the roll must be closed immediately and properly protected (masking tape or roll-collars) after use in order to preserve all its qualities.

Apply to a surface that is clean and free from any traces of contaminants (dust, grease, wax, silicone, etc.).

Particular care must be taken to clean the angles and periphery of the target surfaces in order to enable the film to adhere properly to the surface.

In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
In the case of superficial micro-scratches, the film is able to eliminate these scratch marks when the temperature ranges from 45 °C to 70 °C (from 113 °F to 158 °F) maximum. For this purpose, heat must be applied using a heat gun to activate the self-healing power of the film.

Aanbevelingen

For more information on the application method of the films of the CANDYFENCE range, please refer to the Application Guide on the "Professionals" pages, category "Solar and safety films" on our site www.hexis-graphics.com.

Duurzaamheid in detail

Vertical exposure:
up to 10 years (under normal road use conditions).

Lifespan depends on the type of substrate, its preparation, exposure conditions and nature and frequency of the cleaning.

For instance, it is estimated that a south-facing exposure will divide the durability by two. The same applies to a horizontal exposure. In addition, elevated temperatures (above +50 °C) (+122 °F) or pollution significantly reduce this durability.