Transparent
PG836

Transparent

Antigraffiti Laminates
gloss 1370 mm 30, 120 m medium term polyester PET

Film composed of a 36-µm, very transparent polyester, which is coated with a pressure-sensitive acrylic adhesive. For cold laminating microperforated films on 2D flat surfaces. Can also serve as anti-graffiti protection. Glossy surface finish.

Samenstelling & formaat

Filmtypepolyester PET
Dikte36 µm
Kleeflaagclear
LinerLiner PET
Breedte (mm)1370,1520
Lengte (m)30, 120

Verwerking

Toepassingext/int decoration
Ondergrondenwindows, signage, walls
Oppervlakkenflat
AanbrengmethodeDry application method
Minimale aanbrengtemperatuur+10 °C (+50 °F)
Gebruiksbereik-40 °C to +90 °C (-40 °F to +194 °F)
Duurzaamheidmedium term

Technische eigenschappen

Tack21 N/25 mm
Hechting (20 min)16 N/25 mm
Hechting (24 h)18 N/25 mm
Afpelkracht liner0.1 N/25 mm
Treksterkte> 100 N/25 mm
Krimp (168 h / 70 °C)< 0.2 mm
Toepassing & onderhoud
  • Protection of solvent and aqueous inkjet printed microperforated films.
  • When using the PGR836 film, check that the surface is dry. The drying time of a microperforated film (MICRO1, Micro2 etc.) is 24 hours minimum.
  • During the lamination, make sure that the tensions of each microperforated film and laminate are the same.
  • For an outdoor application, an extra margin of 2 cm (0.79 in.) is preferable.
  • The film can be cleaned with a non-abrasive sponge or a soft cloth and acetone, alcohol, soapy water or HEX'AG.
  • Only use non-felted squeegees during application.
  • In the case of an already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer."
Duurzaamheid in detail
  • Vertical exposure on flat surfaces:
    Graffiti-free, not cleaned using solvents:
    Outdoors: 3 years.
    Indoors: 8 years.
  • Cleaned film: dependent on the method and frequency of the cleaning.

Andere kleuren van de reeks 8