Transparent
Conformable 2D+ anti-graffiti laminate
Conformable film composed of a 38-µm ETFE, which is coated with a pressure-sensitive adhesive. The film is easy to clean and can be used as anti-graffiti protection. The film is suitable for cold-laminating HEXIS digital printing films, which have been printed with solvent, eco-solvent and latex inks. Its mechanical properties allow it to be applied to slightly curved or slightly complex surfaces without losing its anti-graffiti features. Glossy surface finish.
- The technical specifications of the AG300 give it a good conformability that does not alter its anti-graffiti properties or its resistance to wear and tear or UV rays.
- This protective film prevents graffiti from becoming ingrained and facilitates cleaning.
- We recommend HEXAG cleaning liquid and a soft cloth.
- Save time and money: your surfaces will be restored in no time at all, without the need for painting.
Presentatie
Looking for an easier way to maintain your surfaces that are often defaced by graffiti?
The new AG300 anti-graffiti laminate is made for you!
Thanks to its conformability, it adapts easily to allflat or slightly curved surfaces, protecting them effectively against dirt and graffiti.
Say goodbye to the various types of damage that can be inflicted on supermarket signs, bus shelters, motorway rest areas, modular constructions, traffic signs or service vehicles.
Samenstelling & formaat
| Filmtype | polyester PET |
| Dikte | 38 µm |
| Kleeflaag | clear |
| Liner | Liner PET |
| Breedte (mm) | 1370 |
| Lengte (m) | 45 |
Verwerking
| Ondergronden | multi-substrate |
| Oppervlakken | slightly curved |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | long term |
Technische eigenschappen
| Tack | 17 N/25 mm |
| Hechting (20 min) | 10 N/25 mm |
| Hechting (24 h) | 12 N/25 mm |
| Afpelkracht liner | 0.1 N/25 mm |
| Treksterkte | > 20 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.2 mm |
Het product
Ethylene tetrafluoroethylene (ETFE) film, highly transparent look and gloss finish
Permanent, solvent-based acrylic adhesive
30 μm thickness
PET liner
Cold lamination for HEXIS films, to be used in combination with digital printing films, printed
with the following inks: ECO-S, SOLV, LATEX
Durability with no graffiti and no cleaning: up to 7 years (outdoor)
Available in 1370 mm x 45 m (for other retail options, please consult your sales representative)
Toepassing & onderhoud
- Anti-graffiti protection of HEXIS digital printing films.
- This film is moreover perfectly suitable for application by overlapping and can also be covered with adhesive-coated film.
- To clean the film, use a non-abrasive sponge or soft cloth with acetone, alcohol, soapy water or HEX'AG.
- In the case of an already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- Optimal drying time for the inks before laminating, coating or further processing of a HEXIS digital printing film, which has been printed with solvent, eco-solvent and latex inks, is:
- 48 hours for a cast film;
- 24 hours for a calendered film.
Duurzaamheid in detail
- Vertical outdoor exposure:
Graffiti-free, not cleaned using solvents: 8 years.
Cleaned film: dependent on the method and frequency of the cleaning.
