Transparent

• Prior to any application of the film to a substrate prone to degassing, it is the responsibility of the prescriber and applicator to verify the compatibility between film/complex/substrate, to carry out an optimal substrate degassing (synthetic glass such as PMMA, polycarbonate, acrylic, etc.) and to ensure optimal drying time for the inks or paintworks. The applicator is liable for any appearance of bubbles due to substrate degassing.
• In the case of an already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
• The film can be cleaned using non-abrasive accessories, with acetone, alcohol or HEX'AG.
• Due to the matt surface finish of the film, graffiti removal requires an adapted cleaning, which can be slightly longer / more vigorous than that of an anti-graffiti film with a glossy surface finish (like AGR700 or AG800).
• The matt surface finish of this film will reduce the intensity of the bright colours of the underlying substrate.
• Particularly suitable for cold laminating UV inkjet prints.

Although the ink is solid immediately after printing, the polymerisation and reticulation time of the inks is 24 hours (variable depending upon the printer used and the quantity of ink applied). Please comply with this minimum waiting time before laminating the UV inkjet-printed film.

• Vertical outdoor exposure:
  - Only the film, without graffiti, not cleaned using solvents: 3 years.
  - Cleaned film: dependent on the method and frequency of the cleaning.
• The durability of the laminated print depends on the printing technology used and the inks used. Consult the ink manufacturer.