AG800

Transparent

Antigraffiti Laminates

gloss 1520 mm 30,5 m long term polyester PET

Film composed of a 100-µm polyester with anti-scratch treatment, which is coated with a pressure-sensitive adhesive. Glossy surface finish for cold laminating.

Samenstelling & formaat

Filmtype	polyester PET
Dikte	100 µm
Kleeflaag	clear
Liner	Liner PET
Breedte (mm)	1520
Lengte (m)	30,5

Verwerking

Toepassing	ext/int decoration
Ondergronden	windows, signage, walls
Oppervlakken	flat
Minimale aanbrengtemperatuur	+15 °C (+59 °F)
Gebruiksbereik	-40 °C to +90 °C (-40 °F to +194 °F)
Duurzaamheid	long term

Technische eigenschappen

Hechting (24 h)	15 N/25 mm
Treksterkte	> 100 N/25 mm
Brandgedrag	EN 13501-1

Toepassing & onderhoud

Prior to any film application to a substrate prone to outgassing, it is the responsibility of the prescriptor and applicator to make sure of the compatibility between film/complex/substrate, carry out an optimal substrate outgassing (synthetic glass such as PMMA) and ensure optimal drying time for the inks or paintworks. The applicator is liable for any appearance of bubbles due to substrate outgassing.
Reduces very strongly the passage of UV through the film.
In the case of lamination, please make sure to adjust the laminator to the minimum tension.
Once laminated, the complex must be stored and transported on a core featuring a diameter of more than 76 mm if wound.
After application, you must wait for one month before cleaning the surface for the first time.
The film must be cleaned at least 4 times a year.
For film cleaning, use a non-abrasive sponge or soft cloth with acetone, alcohol, soapy water or HEX'AG.
In the case of already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.

Duurzaamheid in detail