AGCR700
Transparent
Antigraffiti Laminates
gloss 1370 mm 50 m long term polyester PET
Film composed of a 36-µm polyester, which is coated with a pressure-sensitive, acrylic adhesive. Glossy surface finish; intended for cold laminating. Particularly suitable for laminating UV inkjet printing.
Samenstelling & formaat
| Filmtype | polyester PET |
| Dikte | 36 µm |
| Kleeflaag | clear |
| Liner | Liner kraft |
| Breedte (mm) | 1370,1520 |
| Lengte (m) | 50 |
Verwerking
| Toepassing | ext/int decoration |
| Ondergronden | windows, signage, walls |
| Oppervlakken | flat |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | long term |
Technische eigenschappen
| Tack | 22 N/25 mm |
| Hechting (20 min) | 15 N/25 mm |
| Hechting (24 h) | 16 N/25 mm |
| Afpelkracht liner | 0.1 N/25 mm |
| Treksterkte | > 100 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.2 mm |
| Brandgedrag | NF P 92-507 (febr. 2004) |
Toepassing & onderhoud
- The film can be cleaned with a non-abrasive sponge or a soft cloth and acetone, alcohol, soapy water or HEX'AG.
- Particularly suitable for cold laminating UV inkjet prints.
Although the ink is solid immediately after printing, the polymerisation and reticulation time of the inks is 24 hours (variable depending upon the printer used and the quantity of ink applied). Please comply with this minimum waiting time before laminating the UV inkjet-printed film.
- In the case of an already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Duurzaamheid in detail
- Vertical outdoor exposure:
Only the film, without graffiti, not cleaned using solvents: 3 years.
Cleaned film: dependent on the method and frequency of the cleaning. - The durability of the laminated print depends on the printing technology used and the inks used. Consult the ink manufacturer.
