AG900
Transparent
Antigraffiti Laminates
gloss 1520 mm 30,5 m medium term polyester PET
Film composed of a 100-µm polyester with anti-scratch/anti-graffiti coating and with a pressure-sensitive adhesive. UV-proof. Glossy surface finish; intended for cold laminating.
Samenstelling & formaat
| Filmtype | polyester PET |
| Dikte | 100 µm |
| Kleeflaag | clear |
| Liner | Liner PET |
| Breedte (mm) | 1520 |
| Lengte (m) | 30,5 |
Verwerking
| Toepassing | ext/int decoration |
| Ondergronden | windows, signage, walls |
| Oppervlakken | flat |
| Minimale aanbrengtemperatuur | +15 °C (+59 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Treksterkte | 28 kg/cm² |
| Brandgedrag | EN 13501-1:2018 |
Toepassing & onderhoud
- Prior to any application of the film to a substrate prone to degassing, it is the responsibility of the prescriber and applicator to verify the compatibility between film/complex/substrate, to carry out an optimal substrate degassing (synthetic glass such as PMMA) and to ensure optimal drying time for the inks or paintworks. The applicator is liable for any appearance of bubbles due to substrate degassing.
- In the case of lamination, please make sure to adjust the laminator to the minimum tension.
- Once laminated, the compound must be stored and transported on a core with a diameter exceeding 76 mm when wound.
- To clean the film, use a non-abrasive sponge or soft cloth with acetone, alcohol, soapy water or HEX'AG.
- In the case of an already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Duurzaamheid in detail
- Vertical exposure (graffiti-free film, not cleaned using solvents):
Outdoors: Central European climate: up to 4 years;- Mediterranean climate: up to 2 years.
