White/Black
Printable film composed of a 180-µm, micro-perforated, colaminated (black/white), monomeric PVC, which is coated with a removable pressure-sensitive adhesive. For UV inkjet printing. The product components enable the printing of graphics on one side (white side) while maintaining the possibility to look through from the other side (black side).
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 180 µm |
| Kleeflaag | clear |
| Liner | PP kraft |
| Breedte (mm) | 1370 |
| Lengte (m) | 30 |
Verwerking
| Toepassing | window graphics |
| Ondergronden | windows |
| Oppervlakken | slightly curved |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +8 °C (+46 °F) |
| Gebruiksbereik | +15 °C to +33 °C (+59 °F to +91 °F) |
| Duurzaamheid | short term |
Technische eigenschappen
| Hechting (24 h) | 7 N/25 mm |
| Afpelkracht liner | 0.1 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.8 mm |
Toepassing & onderhoud
- Touch-dry right after printing.
- Film cutting following printing must be carried out with scissors or a new cutter blade.
- Apply to non-immersed, dry, clean and untreated mineral glass.
- Prior to application, clean the substrate with solvent- and ammonia-free detergents only.
- The liner must be removed very carefully from the two first centimeters of the film width in order to avoid any separation of the two liner layers.
- Leave a 5-mm space between the window sealings and the edge of the MICRO170UV film. Never apply the film directly to the window sealings.
- Good dimensional stability.
- It is possible to peel off the film from the substrate. Remove residual adhesive if necessary.
Caution: This micro-perforated film cannot be used on emergency exits of public transport vehicles (Annex 5 of the Geneva Regulation R43 or the 92/22/CEE directive). The customer is strongly advised to contact the competent local authorities who will validate the conformity of the vehicle with the road traffic regulations in effect.
Aanbevelingen
- For the protection of your prints, use the PC50MICP2 laminate for micro-perforated films.
- The MICRO170UV film's adhesion at edges and corners can be reinforced with our self-adhesive "FPC50MICP2” edge sealing tape for slighty curved substrates or our VR7077 sealing varnish in case of extreme mechanical stress.
The sealing must be done by superposing the tape or varnish between the MICRO170UV film and the glass substrate while avoiding any contact with the seals.
- For more information on the application method of the MICRO170UV film, please refer to its Application Guide available under the "Professionals" heading, in the "Digital printing media” category on our website www.hexis-graphics.com.
Duurzaamheid in detail
- Vertical outdoor exposure:
Unprinted: 1 year upon substrate. Up to 8 months after application without adhesive residues.
Printed and laminated: 1 year (if the print edges are sealed by a sealing varnish).
