TT32905 : Acrylic Foam Clear StrgAdh
ACRYLIC TAPES
0.5-mm, double-sided, technical tape with strong adhesion properties, which is composed of a clear foam that is coated with a pressure-sensitive, acrylic adhesive. Intended for permanently fixing objects onto various substrates. In certain cases, it may replace mechanical fastening (welding, rivets, gluing, etc.). Indoor or outdoor application.
Presentatie
Suitable for structural bonding on various surfaces: wood, metal, glass and most synthetic materials.
High initial tack and very high ultimate adhesion. These double-sided tapes replace screws and rivets. Perfect sealing. Resistant to UV rays, solvents and humidity.
Applications: advertising totems, mounting beadings, mouldings, emblems and reinforcement parts. Typical applications for transparent tapes: light boxes, applications on Plexiglas®
Samenstelling & formaat
| Filmtype | Double-sided |
| Dikte | 0.5 mm |
| Kleeflaag | clear |
| Liner | Liner LDPE |
| Breedte (mm) | 9, 12, 19 |
| Lengte (m) | 33 |
Verwerking
| Toepassing | fastening |
| Ondergronden | windows, signage, walls, objects |
| Oppervlakken | flat |
| Minimale aanbrengtemperatuur | +15 °C to +30 °C (+59 °F to +86 °F) |
| Gebruiksbereik | -40 °C a +93 °C (-40 °F to +199 °F) |
| Duurzaamheid | promotional |
Het product
THICKNESS 0.5 MM
Toepassing & onderhoud
Both the ambient and the substrate temperature must comply with the minimum application temperature. A lower application temperature does not guarantee that there is enough adhesion strength of the double-sided adhesive tape to the substrate.
- Maximum temperature resistance: +150 °C (+302 °F) during some hours.
- During application, apply maximum pressure in order to ensure optimal adhesion.
- Permanent adhesion, optimal after 24 hours of contact at 23 °C.
Aanbevelingen
- For more information on the application method of double-sided tapes, please refer to their Application Guide available under the "Professionals" heading, in the “Specialities“ category on our website www.hexis-graphics.com.
- In the case of an already painted substrate, apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
