Transparent
HOLESHOT HEX'TREM, stand out on every turn.
Film composed of a 300-µm, calendered, monomeric PVC and coated with a pressure-sensitive acrylic adhesive. For cold-laminating digital printing film intended to be used as kits for short term decoration on motorcycles, ATVs, jet-skis etc. Matt surface finish.
- Easy to install
- Extreme adhesion
Presentatie
HEXIS launches a range of special self-adhesive film deco kits for extreme sports, combining aesthetic appeal and resistance.
Intended for short-term decoration of motorbikes, quads, jet-skis and bicycles, the new HOLESHOT HEX’TREM range has been developed to create and protect graphics, logos and sponsors applied to surfaces exposed to abrasion, vibrations and friction.
HOLESHOT HEX’TREM is the guarantee of perfect adhesion and a perfect visual finish.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 300 µm |
| Kleeflaag | clear |
| Liner | Liner PET |
| Breedte (mm) | 1370 |
| Lengte (m) | 25 |
Verwerking
| Toepassing | promotional decoration |
| Ondergronden | vehicles, motorcycles |
| Minimale aanbrengtemperatuur | +10 °C to +35 °C (+50 °F to +95 °F) |
| Gebruiksbereik | -30 °C to +60 °C (-22 °F to +140 °F) |
| Duurzaamheid | short term |
Technische eigenschappen
| Tack | 35 N/25 mm |
| Hechting (20 min) | 30 N/25 mm |
| Hechting (24 h) | 34 N/25 mm |
| Afpelkracht liner | 0.2 N/25 mm |
| Treksterkte | min. 100 N/25 mm |
| Rek bij breuk | min. 100 % |
| Krimp (168 h / 70 °C) | < 1.5 mm |
Het product
Clear laminate, 300μm matt.
Toepassing & onderhoud
- It is recommended to use it in combination with the digital printing film XTPRINT as short-term "motorcycle kit" (duration of one competition).
- Resistance against mechanical stress (impact of gravel, scratches etc.) or water splashing due to extreme sports such as trials, rallies or surface water sports.
- In the case of already painted substrates, self-adhesive media must only be applied onto undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- Before applying this laminate to a calendered HEXIS film intended for solvent-based digital printing, it is recommended to respect the optimal drying time for the inks of 24 hours.
Duurzaamheid in detail
- Vertical outdoor exposure:
Without mechanical stress: Up to 2* years.
With mechanical stress: depends on the type and frequency of the stresses.
*Time during which the film retains a correct surface finish, from a conventional viewing distance. (A slight and gradual change in colour and gloss is a natural and inevitable phenomenon inherent in the natural breakdown of the materials.)
Note: The durability indicated in this document:
- concerns only the laminate and not the finished visual or graphic.
- is inherent in an upright position of ± 10° and in the product's geographical exposure position. Any other position accentuates climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Southern exposure, with a 45° inclination may divide the durability of the film by 2, and horizontal exposure by 2.8. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- is confirmed by UV ageing tests and vertical natural outdoor weathering.
