Transparent
Film composed of a 300-µm, calendered, monomeric PVC, which is coated with a pressure-sensitive acrylic adhesive. For cold-laminating digital printing films intended to be used as kits for short-term decoration on motorcycles, ATVs, jet-skis etc. Glossy (VRK300B) or matt (VRK300M) surface finish.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 300 µm |
| Kleeflaag | clear |
| Liner | Liner kraft |
| Breedte (mm) | 1370 |
| Lengte (m) | 25 |
Verwerking
| Toepassing | promotional decoration |
| Ondergronden | vehicles, motorcycles |
| Oppervlakken | flat |
| Minimale aanbrengtemperatuur | +10 °C to +35 °C (+50 °F to +95 °F) |
| Gebruiksbereik | -30 °C to +60 °C (-22 °F to +140 °F) |
| Duurzaamheid | short term |
Technische eigenschappen
| Tack | 32 N/25 mm |
| Hechting (20 min) | 27 N/25 mm |
| Hechting (24 h) | 33 N/25 mm |
| Afpelkracht liner | 0.2 N/25 mm |
| Treksterkte | min. 100 N/25 mm |
| Rek bij breuk | min. 100 % |
| Krimp (168 h / 70 °C) | < 1.5 mm |
Toepassing & onderhoud
- It is recommended to use it in combination with the digital printing film VCXR201WG1 as short-term "motorcycle kit" (duration of one competition).
- Resistance against mechanical stress (impact of gravel, scratches etc.) or water splashing due to activities such as trials, rallies or surface water sports.
- In the case of already painted substrates, self-adhesive media must only be applied onto undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- Before applying this laminate to a calendered HEXIS film intended for solvent-based digital printing, it is recommended to respect the optimal drying time for the inks of 24 hours.
Duurzaamheid in detail
- Vertical outdoor exposure:
Without mechanical stress: Up to 2* years.
With mechanical stress: depends on the type and frequency of the stresses.
*Time during which the film retains a correct surface finish, from a conventional viewing distance. (A slight and gradual change in colour and gloss is a natural and inevitable phenomenon inherent in the natural breakdown of the materials.)
Note: The durability indicated in this document:
- concerns only the laminate and not the finished visual or graphic.
- is inherent in an upright position of ± 10° and in the product's geographical exposure position. Any other position accentuates climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Southern exposure, with a 45° inclination may divide the durability of the film by 2, and horizontal exposure by 2.8. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- is confirmed by UV ageing tests and vertical natural outdoor weathering.
