V362CG1
Clear
Transparent Films
gloss 1370 mm 45 m promotional Monomeric PVC
Printable film composed of a 80-µm calendered, monomeric PVC, which is coated with a removable, pressure-sensitive acrylic adhesive. For solvent, eco-solvent, latex and UV inkjet printing. Glossy, transparent surface finish.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 80 µm |
| Kleeflaag | clear |
| Liner | Liner PE |
| Breedte (mm) | 1370,1600 |
| Lengte (m) | 45 |
Verwerking
| Toepassing | window graphics |
| Ondergronden | windows, light boxes |
| Oppervlakken | flat |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -20 °C to +60 °C (-4 °F to +140 °F) |
| Duurzaamheid | promotional |
Technische eigenschappen
| Tack | 9 N/25 mm |
| Hechting (20 min) | 9 N/25 mm |
| Hechting (24 h) | 11 N/25 mm |
| Afpelkracht liner | 0.1 N/25 mm |
| Treksterkte | min. 40 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.8 mm |
Toepassing & onderhoud
- Very good adhesion to glass, steel, aluminium, PVC, melamine, etc. except grain substrates or substrates coated with acrylic paint.
When applied to laminated monomeric or polymeric PVC films, the removable adhesives can become semi-permanent. The duration of application and the type of exposure may accelerate this phenomenon.
- In the case of an already painted substrate, apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- The surface finish of your printings may be modified/improved/protected by applying the appropriate laminate: V700 or V650. For UV printings, use the protective VCR650 laminate.
- To avoid any physical and/or chemical (cleaning) damage, it is advisable to laminate after printing.
- For more information on the application method of the V362CG1 film, please refer to its Application Guide available under the "Professionals" heading, in the "Digital printing media” category on our website www.hexis-graphics.com.
Duurzaamheid in detail
- Vertical outdoor exposure on flat surfaces:
Unprinted: 6 months depending on the substrate, without significant traces of adhesive.
Printed and laminated: 12 months (if the print edges are sealed by a sealing varnish).
Printed: 3 months without significant traces of adhesive.
