Transparent
Digital printing Flex
Textile marking
Very thin and elastic, clear, 35-µm polyurethane film, ideally recommended for application to white or light coloured cotton and polyester textiles. Perfectly suitable for the creation of medium and large-sized logos and images. Matt surface finish.
- UFLEXCLEAR has a lesser thickness and is particularly elastic and silky.
- UFLEXCLEAR does not require the use of application tape.
Presentatie
UFLEXCLEAR, THE ULTRA FLEXIBLE printable flex for making YOUR MARKINGS on light-coloured fabrics!
Its printability, thinness and cutting qualities make it a flagship product for your prints on light-coloured fabrics!
It can be applied to white or light-coloured cotton or polyester fabrics without leaving any visible contours.
As UFLEXCLEAR is a transparent flex, it is crucial to print in mirror mode.
Samenstelling & formaat
| Filmtype | Textile printing and decoration films |
| Dikte | 35 µm |
| Kleeflaag | clear |
| Liner | Liner PET |
| Breedte (mm) | 500,750,1250 |
| Lengte (m) | 25 |
Verwerking
| Toepassing | textile |
| Ondergronden | fabrics, cotton, polyester |
| Oppervlakken | textile |
| Duurzaamheid | long term |
Het product
Clear matt film
35 microns thickness
Clear permanent heat-activated adhesive
Non-adhesive liner
Printable with Eco-Solvent, Solvent inks
Recommended for cotton, polyester
Available in widths of 500, 750 and 1250 mm by 25 m (retail sizes depending on stock)
Toepassing & onderhoud
HEXIS-tip
UFLEXCLEAR, with its low thickness, is exceptionally elastic and silky.
The application of UFLEXCLEAR does not require the use of any tape.
Aanbevelingen
- The use of softeners is not recommended since it can cause an alteration of the flex film adhesion to the fabric.
- For more information on the application method of the UFLEXCLEAR film, please refer to the PRINTFLEX Application Guide available under the "Professionals" heading, in the "Films for textile” category on our website www.hexis-graphics.com.
