SEACOAT
Blue
Protection de Bateau
Anti-fouling film
An environment-friendly solution
satin 1230 mm 30 m medium term Cast PVC
The film is composed of 120-µm, cast vinyl, which is coated with a pressure-sensitive, solvent-based, acrylic adhesive. Intended for the protection of hulls of boats sailing in a marine environment, excluding propellers and shafts. It has a blue colouration with a satin surface finish.
- Optimised installation and removal
- Does not require sanding, no dust/particles generated.
- Faster removal, limiting downtime for the boat.
- SEACOAT film can be recycled.
Presentatie
Active* surface with antifouling formulation, multilayered cast PVC developed to withstand the marine environment and conform to the contours of the hull.
* Presence of biocides
Samenstelling & formaat
| Filmtype | Cast PVC |
| Dikte | 120 µm |
| Kleeflaag | clear |
| Liner | Liner kraft |
| Breedte (mm) | 1230 |
| Lengte (m) | 30 |
Verwerking
| Toepassing | boats protection |
| Ondergronden | boats |
| Oppervlakken | concave and convex |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C to +30 °C (+50 °F to +86 °F) |
| Gebruiksbereik | +5 °C to +40 °C (+41 °F to +104 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Tack | 19 N/25 mm |
| Hechting (20 min) | 20 N/25 mm |
| Hechting (24 h) | 26 N/25 mm |
| Afpelkracht liner | 0.6 N/25 mm |
| Treksterkte | min. 15 N/25 mm |
| Rek bij breuk | min. 90 % |
| Krimp (168 h / 70 °C) | < 0.3 mm |
Het product
Waterproof multi-layered self-adhesive film
Cast PVC
120μm thickness
Blue satin finish
Silicone-coated kraft paper liner
Solvent-based acrylic adhesive
Underwater durability up to 2 years
Cast PVC
120μm thickness
Blue satin finish
Silicone-coated kraft paper liner
Solvent-based acrylic adhesive
Underwater durability up to 2 years
Toepassing & onderhoud
- Active substances: Cuprous oxide and zineb, < 35 % w/w of the entire product.
- The film is designed to be applied to the hulls of boats sailing in salt water. It is not suitable for use in fresh water.
- The film must not be used on hulls composed of aluminium, light alloy or on galvanised surfaces.
- Before the application of the antifouling film to the hull of a boat, it is mandatory to carry out refurbishment work first. The film must be applied to a renewed primer coat or gelcoat, as a replacement of the conventional antifouling paint.
HEXIS decline all responsibility in the case of application of the film to an inadequately prepared, dilapidated or with an antifouling film incompatible hull.
- In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Duurzaamheid in detail
- For immersed use: up to 2 years.