Transparent
Mineral effect
Film composed of a 110-µm, clear, structured, cast PVC, which is coated with a pressure-sensitive acrylic adhesive. Designed to be cold laminated on mass-coloured or digital printing films; it can also be directly applied to smooth 2D or moderated 3D surfaces. Concrete / mineral wall effect.
- Due to their reinforced adhesive, our textured effect laminates are also compatible with films printed with UV inks.
- CREATE YOUR OWN FULLY CUSTOMISABLE DECORATION & PRINTED GRAPHICS COMPLEX
- #1 Choose your printable film (durability, conformability, adhesive...)
- #2 Download one of our HEX’PERIENCE textures for free and print your film
- #3 Laminate with the structured effect laminate of your choice
Presentatie
Solutions for laminating and creating special textured effects!
HEXIS have developed a full range of transparent laminates with structured effects to satisfy your most demanding projects.
Interior & exterior decoration
Samenstelling & formaat
| Filmtype | Cast PVC |
| Dikte | 110 µm |
| Kleeflaag | clear |
| Liner | Liner PE |
| Breedte (mm) | 1520 |
| Lengte (m) | 30 |
Verwerking
| Toepassing | ext/int decoration |
| Ondergronden | windows, signage, walls, objects, vehicles |
| Oppervlakken | concave and convex |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | long term |
Technische eigenschappen
| Tack | 21 N/25 mm |
| Hechting (20 min) | 14 N/25 mm |
| Hechting (24 h) | 16 N/25 mm |
| Afpelkracht liner | 0.6 N/25 mm |
| Treksterkte | min. 15 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.8 mm |
Het product
1520 mm
up to 5 years
Toepassing & onderhoud
- UV protection.
-
For modifying/improving/protecting:
- a plotter or wrap vinyl: apply the PCWALL film to unstructured films only using a cold laminator or via direct application. The compound can be cut using a plotter, except in combination with a full wrap film. After cutting, it is possible to transfer with the HEX860 tape.
- a digital printing film: apply the PCWALL film to solvent, eco-solvent, latex or UV inkjet printed films only.
- any other type of substrate: only apply to a surface in good condition or to a properly prepared substrate.
Due to the wide variety of existing substrates, the application of film to an unsuitable and/or not adequately prepared surface or coating may result in media lifting from the substrate or damage to the substrate when the film is removed. The application and removal of the film are at the judgement and risk of the installer. HEXIS will not, under any circumstances, be liable for any damages or deteriorations caused by the installation or removal of a vinyl film.
- For film cleaning, only use a non-abrasive sponge or soft cloth with soapy water.
Aanbevelingen
- Before applying this laminate to a HEXIS digital printing film, which has been printed with solvent inks, it is recommended to respect the following optimal drying time for the inks:
- 48 hours if the printed film is cast,
- 24 hours if the printed film is calendered. - For more information on the application method of the PCWALL film, please refer to its Application Guide under the "Professionals" heading, in the "Laminates" category on our website www.hexis-graphics.com.
Duurzaamheid in detail
- Vertical outdoor exposure, upon substrate:
Without mechanical stress: up to 5* years.
With mechanical stress: depends on the type and frequency of the stresses.
*Time during which the film retains a correct surface finish, from a conventional viewing distance. (A slight and gradual change in colour and gloss is a natural and inevitable phenomenon inherent in the natural breakdown of the materials.)
Note: The durability indicated in this document:
- concerns only the laminate and not the finished visual or graphic.
- is inherent in an upright position of ± 10° and in the product's geographical exposure position. Any other position accentuates climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Southern exposure, with a 45° inclination may divide the durability of the film by 2, and horizontal exposure by 2.8. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- is confirmed by UV ageing tests and vertical natural outdoor weathering.
- Indoor exposure, upon substrate: up to 7 years.
This durability may vary depending on frequency, type of cleaning and mechanical stress (friction, impacts etc.) to which the film is exposed.
