PCSTAR01G
Note: The durability indicated in this document:
Transparent
Special Finish Laminates
Laminate sparkle effect
gloss 1520 mm 25 m medium term Cast PVC
Film composed of a 70-µm, clear, cast PVC with glitter effect, which is coated with a pressure-sensitive acrylic adhesive. Glossy or satin surface finish; intended for cold laminating.
- Due to their reinforced adhesive, our textured effect laminates are also compatible with films printed with UV inks.
- CREATE YOUR OWN FULLY CUSTOMISABLE DECORATION & PRINTED GRAPHICS COMPLEX
- #1 Choose your printable film (durability, conformability, adhesive...)
- #2 Download one of our HEX’PERIENCE textures for free and print your film
- #3 Laminate with the structured effect laminate of your choice
Presentatie
Solutions for laminating and creating special textured effects!
HEXIS have developed a full range of transparent laminates with structured effects to satisfy your most demanding projects.
Interior & exterior decoration
Samenstelling & formaat
| Filmtype | Cast PVC |
| Dikte | 70 µm |
| Kleeflaag | clear |
| Liner | Liner PE |
| Breedte (mm) | 1520 |
| Lengte (m) | 25 |
Verwerking
| Toepassing | ext/int decoration |
| Ondergronden | windows, signage, walls, objects, vehicles |
| Oppervlakken | concave and convex |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Tack | 17 N/25 mm |
| Hechting (20 min) | 19 N/25 mm |
| Hechting (24 h) | 25 N/25 mm |
| Afpelkracht liner | 0.4 N/25 mm |
| Treksterkte | min. 20 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.5 mm |
Het product
Cast PVC film, 70 μm
1520 mm
up to 3 years
1520 mm
up to 3 years
Toepassing & onderhoud
- UV protection.
- For modifying/improving/protecting:
- a plotter or wrap vinyl: apply the PCSTARXX film to unstructured films only using a cold laminator or via direct application. The compound can be cut using a plotter, except Super Chrome films (see technical data sheets of Super Chrome films). After cutting, it is possible to transfer with the HEX904 and HEX860 tapes.
- a digital printing film: apply the PCSTARXX film to solvent, eco-solvent, latex or UV inkjet printed films only.
- an already painted substrate: apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer. - To clean the film, only use a non-abrasive sponge or soft cloth with soapy water.
Aanbevelingen
- Before applying this laminate to a HEXIS digital printing film, which has been printed with solvent inks, it is recommended to respect the following optimal drying time for the inks:
- 48 hours if the printed film is cast,
- 24 hours if the printed film is calendered.
Duurzaamheid in detail
- Vertical outdoor exposure, upon substrate:
Without mechanical stress: up to 5* years.
With mechanical stress: depends on the type and frequency of the stresses.
*Time during which the film retains a correct surface finish, from a conventional viewing distance. (A slight and gradual change in colour and gloss is a natural and inevitable phenomenon inherent in the natural breakdown of the materials.)
Note: The durability indicated in this document:
- concerns only the laminate and not the finished visual or graphic.
- is inherent in an upright position of ± 10° and in the product's geographical exposure position. Any other position accentuates climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Southern exposure, with a 45° inclination may divide the durability of the film by 2, and horizontal exposure by 2.8. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- is confirmed by UV ageing tests and vertical natural outdoor weathering.
- Indoor exposure, upon substrate: up to 7 years.
This durability may vary depending on frequency, type of cleaning and mechanical stress (friction, impacts etc.) to which the film is exposed.
