White

Polymeric Films 200 Series

gloss 1370 mm 45 m long term polymeric PVC

Printable film composed of a 70-µm, calendered, polymeric PVC, which is coated with a grey, pressure-sensitive acrylic adhesive. Micro-structured adhesive for faster application and air evacuation. “Low-tack” adhesive for optimum ease of application. Intended for solvent, eco-solvent, latex and UV inkjet printing. Glossy surface finish.

Samenstelling & formaat

Filmtype	polymeric PVC
Dikte	70 µm
Kleeflaag	grey
Liner	Liner HEX'Press
Breedte (mm)	1370,1600
Lengte (m)	45

Verwerking

Toepassing	ext/int decoration
Ondergronden	windows, signage
Oppervlakken	slightly curved
Aanbrengmethode	Dry application method
Minimale aanbrengtemperatuur	+20 °C to +25 °C (+68 °F to +77 °F)
Gebruiksbereik	-40 °C to +90 °C (-40 °F to +194 °F)
Duurzaamheid	long term

Technische eigenschappen

Tack	12 N/25 mm
Hechting (20 min)	14 N/25 mm
Hechting (24 h)	16 N/25 mm
Afpelkracht liner	0.2 N/25 mm
Treksterkte	min. 35 N/25 mm
Krimp (168 h / 70 °C)	< 0.4 mm

Toepassing & onderhoud

Adhesion to glass, steel, aluminium, PVC, melamine, etc. except grain substrates or substrates coated with acrylic paint.
In the case of an already painted substrate, apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.

Aanbevelingen

The surface finish of your printings may be modified/improved/protected by applying the appropriate laminate: V750 or PC500. For UV printings, use the protective VCR750 laminate.
For more information on the application method of the HX200WG2 film, please refer to its Application Guide available under the "Professionals" heading, in the "Digital printing media” category on our website www.hexis-graphics.com.

Duurzaamheid in detail