Ruby Red
REINFORCED ADHESIVE
This range is available in gloss and matt.
Film composed of an 80-µm, calendered, monomeric PVC, which is coated with a pressure-sensitive, acrylic adhesive. Particularly recommended for indoor application to walls (e.g. Placoplatre® BA13 plasterboard, smooth or slightly textured walls) or low-energy surfaces (polyethylene, polypropylene, etc.). Matt surface finish.
Presentatie
Thanks to its reinforced adhesive, VCRE3000 is particularly recommended for indoor application on walls (such as Placoplatre® BA13, smooth or slightly textured walls) or on low-energy surfaces (polyethylene or polypropylene, e.g. waste containers). Matt and gloss finish.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 80 µm |
| Kleeflaag | clear |
| Liner | Liner kraft |
| Breedte (mm) | 615,1230 |
| Lengte (m) | 30 |
Verwerking
| Toepassing | interior decoration |
| Ondergronden | walls, low-energy surfaces |
| Oppervlakken | flat |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Tack | 17 N/25 mm |
| Hechting (20 min) | 16 N/25 mm |
| Hechting (24 h) | 19 N/25 mm |
| Afpelkracht liner | 0.2 N/25 mm |
| Treksterkte | min. 40 N/25 mm |
| Krimp (168 h / 70 °C) | < 1.2 mm |
| Brandgedrag | EN 13501-1:2018 |
Het product
80 MICRONS
UP TO 6 YEARS DURABILITY
CLEAR REINFORCED SOLVENT-BASED ACRYLIC ADHESIVE
SILICONISED KRAFT LINER
Toepassing & onderhoud
- The film can be transferred using a PE or PP transfer film (HEX904, HEX910, HEX930, etc.).
- The VCRE3000 film can be applied to an A1 or A2-s1, d0 classified plasterboard substrate.
- According to the substrate and/or paintwork, the application and removal are at the installer's own judgement and own risk.
Duurzaamheid in detail
|
Dominant colour |
Max. indicative durability (years) (1) Vertical indoor exposure (± 10°) on flat surfaces Central European climate |
|
White, Black |
6 |
|
Colours, other tints |
5 |
|
Colour with red, yellow/orange tendency. |
2 |
- The pigmentation (colour) of the PVC affects the stability duration of the dyes. An estimate of such a durability is confirmed by accelerated UV ageing tests performed on the VCRE3000 films and by natural outdoor weathering.
- The durability indicated in the chart 1 below is obtained specifically in vertical outdoor exposure (± 10°). The conditions of durability indicated in Chart 1 are inherent to this position up to a few degrees. Other positions accentuate climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- To estimate the durabilities for non-vertical exposure, divide the durabilities in Chart 1 by the factors given in Chart 2.
|
Exposure |
Dividing factor (1) Central European climate |
|
Non-vertical exposure |
2 |
|
Horizontal exposure |
2,8 |
Chart 2: Dividing factor
- The real durability of a product depends on a large number of parameters, including, among others, the quality and preparation of the substrate, exposure (environment, climate, exposure angle), graphics maintenance, and degree of pollution.
