Emerald Green
SIGN VINYL
Marking, decoration & signage
- The HXE3000 film has been specially designed for quick implementation of your medium-term visual communications.
- This new range combines the performance of ECOTAC films with a structured HEXPRESS liner, allowing air to be released and the film to be easily repositioned during the installation.
Presentatie
Take a look at our easy-to-install intermediate marking film!
Sign marking, indoor and outdoor signage, exhibition stands and shop windows.
With the new HXE3000 range, enjoy simplified installs with every application.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Kleeflaag | clear |
| Liner | Liner kraft |
| Breedte (mm) | 1230 |
| Lengte (m) | 30 |
Verwerking
| Toepassing | ext/int decoration, window graphics, promotional decoration |
| Ondergronden | windows, signage, walls, objects |
| Oppervlakken | flat |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Tack | 22 N/25 mm |
| Hechting (20 min) | 17 N/25 mm |
| Hechting (24 h) | 18 N/25 mm |
| Treksterkte | min. 40 N/25 mm |
Het product
Clear permanent solvent-based acrylic adhesive
80-µm thickness
HEXPRESS liner for easy installation
Gloss or matt finish
Durability: up to 6 years for outdoor use (vertical exposure)
Indoor and outdoor medium-term application, on flat surfaces
Available in 1230 mm x 30 m (other retail options are possible, depending on stock availability)
Toepassing & onderhoud
-
- Apply to an untreated surface, free from all traces of contaminants (dust, grease, wax, silicone etc.) and cleaned with a soapy liquid without anti-adherent additives.
Particular care must be taken to clean the angles and periphery of the glass surfaces in order to enable the film to adhere properly to the surface.
- Hygrometry influences the quality of the application.
On a cold window condensation may occur between the window and the adhesive film; it is therefore advisable to heat the substrate.
Both the ambient and the substrate temperature must comply with the minimum application temperature.
- The film or paper transfer tape allows you to press the squeegee firmly over the entire surface of the graphic to be transferred.
- In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Duurzaamheid in detail
|
Dominant colour |
Max. indicative durability (years)(1) Vertical exposure (± 10°) |
|
white, black |
6 |
|
Colours, other tints |
5 |
|
Colour with red, yellow/orange tendency |
2 |
Chart 1 : Vertical durabilities(1) Central Europe
- The pigmentation (colour) of the PVC affects the stability duration of the dyes. An estimate of such a durability is confirmed by accelerated UV ageing tests performed on the HXE3000 films and by natural outdoor weathering.
- The results indicated below are obtained specifically in vertical (± 10°) outdoor exposure. The conditions of durability indicated in Chart 1 are inherent to this position up to a few degrees. Other positions accentuate climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- To estimate the durabilities for non-vertical exposure, divide the durabilities in Chart 1 by the factors given in Chart 2.
|
Exposure |
Dividing factor (1) Central European climate |
|
Non-vertical exposure |
2 |
|
Horizontal exposure |
2,8 |
Chart 2: Dividing factor
- The actual durability of a product depends on a large number of parameters, including, among others, the quality and preparation of the substrate, exposure (environment, climate, exposure angle), graphics maintenance, and degree of pollution.
