Frosted Glass Finish
FROSTED GLASS PLOTTER FILM
The film is composed of 80-µm calendered, monomeric PVC and coated with a pressure-sensitive acrylic adhesive. Structured adhesive for faster application and air evacuation. Frosted surface finish.
Presentatie
This self-adhesive film with a frosted glass finish is perfect for all short- to medium-term applications.
The HXE3GIVMV2 film comes with a textured adhesive HEX'PRESS for better air egress and faster application.
This product is for dry application.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 80 µm |
| Kleeflaag | clear |
| Liner | Liner HEX'Press |
| Breedte (mm) | 1230 |
| Lengte (m) | 50 |
Verwerking
| Toepassing | window graphics |
| Oppervlakken | flat |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Tack | 18 N/25 mm |
| Hechting (20 min) | 12 N/25 mm |
| Hechting (24 h) | 15 N/25 mm |
| Afpelkracht liner | 0.1 N/25 mm |
| Treksterkte | min. 40 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.8 mm |
| Brandgedrag | EN 13501-1 |
Het product
80 Microns
Up to 3 years durability
Frosted glass matt finish
Solvent-based acrylic adhesive
E3GIVMV2: siliconised kraft liner
HXE3GIVMV2: HEX'PRESS iner
Toepassing & onderhoud
- Apply to an untreated surface, free from all traces of contaminants (dust, grease, wax, silicone etc.) and cleaned with a soapy liquid without anti-adherent additives.
Particular care must be taken to clean the angles and periphery of the glass surfaces in order to allow the film to adhere properly to the surface.
- Hygrometry influences the quality of the application.
On a cold window condensation may occur between the window and the adhesive film; it is therefore advisable to heat the substrate.
Both the ambient and the substrate temperature must comply with the minimum temperature.
- The film or paper transfer tape allows you to press the squeegee firmly over the entire surface of the graphic to be transferred.
- In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- For a window glass application, due to a variety of light exposures and conditions, especially when applied with a backlight, it is recommended to perform a preliminary test before each type of application.
- For more information on the application method of the HXE3GIVMV2 films please refer to their Application Guide available under the "Professionals" heading, in the "Plotter vinyls” category on our website www.hexis-graphics.com.
Duurzaamheid in detail
- Vertical exposure on flat surfaces: 3 years.
