Transparent
The SURFACE PROTECTION SPSM film is an adhesive film developed for protecting all substrates that do not require major aesthetic criteria. Its excellent shock-absorbing properties protect your substrate against physical, mechanical, chemical and solar stress. Super matt surface finish.
Samenstelling & formaat
| Filmtype | polyurethane PU |
| Dikte | 180 µm |
| Kleeflaag | clear |
| Liner | Liner PET |
| Breedte (mm) | 615,1230,1520 |
| Lengte (m) | 20 |
Verwerking
| Aanbrengmethode | Wet application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | long term |
Technische eigenschappen
| Tack | 12 N/25 mm |
| Hechting (20 min) | 20 N/25 mm |
| Hechting (24 h) | 24 N/25 mm |
| Afpelkracht liner | 0.2 N/25 mm |
| Treksterkte | > 100 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.2 mm |
Toepassing & onderhoud
- The SPSM film is intended for surface protection. Its super matt surface finish may be altered by matt stripes (mottling) and/or surface imperfections. Therefore its use should be reserved for applications not requiring an aesthetic aspect.
- Cut the film to the size of the part to be wrapped, allowing +10 cm (4 in.) of extra margin.
The remaining film must be stored on its original core (do not cut the rolls into several lengths or widths, do not repackage the product); the roll must be closed immediately and properly protected (masking tape or roll-collars) after use in order to preserve all its qualities.
- Wet application directly to the surface that is to be protected; check the compatibility of the substrate with water.
- Apply to a surface that is clean and free from any traces of contaminants (dust, grease, wax, silicone, etc.).
Particular care must be taken to clean the angles and periphery of the target surfaces in order to enable the film to adhere properly to the surface.
- In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- Conformable product developed for protecting all substrates.
- Excellent protection against vandalism.
- The improved surface sliding of the SPSM film enables you to reduce squeegee friction during application and facilitates the film cleaning.
- To facilitate application, HEXIS have several types of squeegees in its range of accessories, ranging from soft to hard.
Duurzaamheid in detail
- Vertical exposure, Central European climate:
Up to 10 years (under normal use conditions). - Lifespan depends on the type of substrate, its preparation, exposure conditions and nature and frequency of the cleaning.
For instance, it is estimated that a south-facing exposure (in the northern hemisphere) will divide the durability by two. The same applies to a horizontal exposure. In addition, elevated temperatures (above +50 °C) (+122 °F) or pollution significantly reduce this durability.
