transparent

• For the protection of HXLT200 digital printing films that have been applied to flat surfaces.
• UV protection.
• To clean the film, only use a non-abrasive sponge or soft cloth with soapy water.
• In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.

Aanbevelingen

• Prior to any lamination, coating or other of a printed HXLT200 film, you must wait for 24 hours after printing in order to ensure optimal drying time for the inks.

• Vertical outdoor exposure:
  Without mechanical stress: Up to 4* years.
  With mechanical stress: depends on the type and frequency of the stresses.

*Time during which the film retains a correct surface finish, from a conventional viewing distance. (A slight and gradual change in colour and gloss is a natural and inevitable phenomenon inherent in the natural breakdown of the materials.)

Note: The durability indicated in this document:
- concerns only the laminate and not the finished visual or graphic.
- is inherent in an upright position of ± 10° and in the product's geographical exposure position. Any other position accentuates climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Southern exposure, with a 45° inclination may divide the durability of the film by 2, and horizontal exposure by 2.8. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- is confirmed by UV ageing tests and vertical natural outdoor weathering.

• Vertical indoor exposure:
  up to 9 years (for surfaces or areas subject to moderate handling or visitor frequency).

A film applied to surfaces exposed to mechanical stress will be subject to repeated abrasion that will reduce more or less rapidly its lifespan (change of appearance, peeling off, etc.).