transparent
The film is composed of 50-µm, transparent, cast PVC, which is coated with a pressure-sensitive, acrylic adhesive. Glossy (PC190G2), matt (PC190M3) or satin (PC190S) surface finish; for cold-laminating cast HEXIS digital printing films: films of the 100 series, HX190WG2 and THE190EVO. This laminate, which is thicker than the current 30-µm laminates, enables the compound to be easily handled and installed.
Presentatie
Ces laminations sont idéales pour protéger vos impressions numériques adhésivées sur un véhicule.
Associées au HX190WG2 ou au THE190EVO elles offrent un complexe de 80 à 100 microns plus facile à poser et à déposer qu’un vinyle imprimé seul.
Samenstelling & formaat
| Filmtype | Cast PVC |
| Dikte | 50 µm (2 mil) |
| Kleeflaag | clear |
| Liner | Liner PE |
| Breedte (mm) | 1370,1520 |
| Lengte (m) | 25, 50 |
Verwerking
| Toepassing | wrapping |
| Ondergronden | vehicles |
| Oppervlakken | concave and convex |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | long term |
Technische eigenschappen
| Tack | 21 N/25 mm |
| Hechting (20 min) | 17 N/25 mm |
| Hechting (24 h) | 18 N/25 mm |
| Afpelkracht liner | 0.2 N/25 mm |
| Treksterkte | min. 30 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.5 mm |
Toepassing & onderhoud
- Protection of solvent inkjet printed cast films.
- To clean the film, only use a non-abrasive sponge or soft cloth with soapy water.
- UV protection.
- In the case of an already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- Prior to any lamination, coating or other of a cast printed film, you must wait for 48 hours after printing in order to ensure optimal drying time for the inks.
Duurzaamheid in detail
- Vertical outdoor exposure:
Without mechanical stress: up to 5* years.
With mechanical stress: depends on the type and frequency of the stresses.
*Time during which the film retains a correct surface finish, from a conventional viewing distance. (A slight and gradual change in colour and gloss is a natural and inevitable phenomenon inherent in the natural breakdown of the materials).
Note: The durability indicated in this document:
- concerns only the laminate and not the finished visual or graphic.
- is inherent in an upright position of ± 10° and in the product's geographical exposure position. Any other position accentuates climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Southern exposure, with a 45° inclination may divide the durability of the film by 2, and horizontal exposure by 2.8. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- is confirmed by UV ageing tests and vertical natural outdoor weathering.
- Vertical indoor exposure: up to 7 years (for surfaces or areas subject to moderate handling or visitor frequency).
A film applied to surfaces exposed to mechanical stress will be subject to repeated abrasion that will reduce more or less rapidly its lifespan (change of appearance, peeling off, etc.).
