transparent
V750M

transparent

Polymeric Adhesive Laminates
matt 1050 mm 50 m long term polymeric PVC

Film composed of 70-μm, calendered, polymeric PVC and coated with a pressure-sensitive acrylic adhesive. Glossy, matt or satin surface finish; intended for cold laminating.

Samenstelling & formaat

Filmtypepolymeric PVC
Dikte70 µm
Kleeflaagclear
LinerLiner kraft
Breedte (mm)1050,1370,1600
Lengte (m)50

Verwerking

Toepassingext/int decoration
Ondergrondenwindows, signage, walls
Oppervlakkenslightly curved
Minimale aanbrengtemperatuur+10 °C (+50 °F)
Gebruiksbereik-40 °C to +90 °C (-40 °F to +194 °F)
Duurzaamheidlong term

Technische eigenschappen

Tack18 N/25 mm
Hechting (20 min)15 N/25 mm
Hechting (24 h)20 N/25 mm
Afpelkracht liner0.2 N/25 mm
Treksterktemin. 40 N/25 mm
Krimp (168 h / 70 °C)< 0.5 mm
Toepassing & onderhoud
  • UV protection.
  • Good stability in combination with the films of the V200 range.
  • In the case of an already painted substrate, apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Duurzaamheid in detail
  • Vertical outdoor exposure:
    Without mechanical stress: Up to 5* years.
    With mechanical stress: depends on the type and frequency of the stresses.

*Time during which the film retains a correct surface finish, from a conventional viewing distance. (A slight and gradual change in colour and gloss is a natural and inevitable phenomenon inherent in the natural breakdown of the materials.)

Note: The durability indicated in this document:
- concerns only the laminate and not the finished visual or graphic.
- is inherent in an upright position of ± 10° and in the product's geographical exposure position. Any other position accentuates climatic influences and an alteration in gloss or colour, or even a slight dusting may appear. Southern exposure, with a 45° inclination may divide the durability of the film by 2, and horizontal exposure by 2.8. Application to a vehicle bonnet is particularly severe, due to the horizontal exposure and the heat from the engine.
- is confirmed by UV ageing tests and vertical natural outdoor weathering.

 

  • Vertical indoor exposure:
    Up to 7 years (on surfaces or areas not subject to frequent handling or high visitor frequency).

A film applied to surfaces exposed to mechanical stress will be subject to repeated abrasion that will reduce more or less rapidly its lifespan (change of appearance, peeling off, etc.).

Andere kleuren van de reeks 2