WALLPAPER2
White
Wall Decoration
PRINTABLE PRE-PASTED WALLPAPER
Wall decoration
satin 1067 mm 51 m medium term Wallpaper
Wall covering composed of a pre-pasted, non-woven, PVC-free paper. For solvent, eco-solvent, latex and UV inkjet printing. Interior application. Highly scratch-resistant. It has a satin surface finish.
- High-quality wallpaper
- Thanks to its high opacity, the WALLPAPER2 offers good coverage and masks imperfections on the walls.
- During printing, its surface remains perfectly smooth and uniform, showcasing all the colours of your design. A natural, authentic result guaranteed!
- Quick, easy and mess-free application
- The thickness of the WALLPAPER2 makes preparing the walls easier. You can do away with paste prep... It’s such a timesaver!
- Thanks to its fast drying feature, you can see the final result in no time!
Presentatie
Want to enhance and customize your walls?
Invest in your decoration or renovation projects with WALLPAPER2
This pre-pasted printable wallpaper is specifically developed to ensure easy and quick installation.
The WALLPAPER2 results in an economic solution compared to standard wallpapers and vinyl’s; it
will offer you numerous creative opportunities, transforming a wall in good condition or even renovating a wall in bad condition.
Samenstelling & formaat
| Filmtype | Wallpaper |
| Kleeflaag | clear |
| Breedte (mm) | 1067,1372 |
| Lengte (m) | 51 |
Verwerking
| Toepassing | interior decoration |
| Ondergronden | walls |
| Oppervlakken | flat |
| Duurzaamheid | medium term |
Technische eigenschappen
| Brandgedrag | EN 13501-1:2018 |
Het product
Pre-pasted, printable, non-woven wallpaper
Permanent water-based adhesive
Scratch-resistant
350 μm thickness
White satin finish
Indoor application
Compatible inks: ECO-S, SOLV, LATEX, UV
Product rated C-s1, d0 according to Euroclass EN 13501-1+A1 fire classification
Available in 1067, 1372 mm x 51 m
Permanent water-based adhesive
Scratch-resistant
350 μm thickness
White satin finish
Indoor application
Compatible inks: ECO-S, SOLV, LATEX, UV
Product rated C-s1, d0 according to Euroclass EN 13501-1+A1 fire classification
Available in 1067, 1372 mm x 51 m
Toepassing & onderhoud
- It is highly recommended to wear cotton gloves during any handling of the printed product.
- Cut the rolls into panels after printing.
- Indoor application to non-porous, smooth, dry and clean surfaces, which are free from any wallpaper and flaking paint residues.
- Paste humidification is done by immersing the entire WALLPAPER2 panel into the water tray for a maximum duration of 15 to 30 seconds. Once in the water, ensure that there is sufficient space between the wound film layers. Evacuate the water by pulling the panel out from one side to remove it from the water.
The soaking water must be changed after 6 to 7 immersed panels.
- Apply the film within the 2 minutes following its removal from the water.
- WALLPAPER2 applies like wallpaper.
- After application, immediately clean any excess paste with a damp sponge.
