EPS150ADE
White
Papers
satin 1372 mm 35 m short term paper
Adhesive-coated, 150 g/m², non-woven FSC® paper, which is intended for indoor application to walls. Micro-structured adhesive for faster application and air evacuation. For solvent, eco-solvent, latex and UV inkjet printing. Satin surface finish.
Samenstelling & formaat
| Filmtype | paper |
| Dikte | 200 µm |
| Kleeflaag | clear |
| Liner | Liner PE |
| Breedte (mm) | 1372 |
| Lengte (m) | 35 |
Verwerking
| Oppervlakken | flat |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +15 °C (+59 °F) |
| Gebruiksbereik | -15 °C to +80 °C (+5 °F to +176 °F). |
| Duurzaamheid | short term |
Technische eigenschappen
| Treksterkte | > 4,4 kN/m |
Toepassing & onderhoud
- Application to clean (dusted and cleaned with water or slightly soapy water), dry and smooth surfaces (not to rough walls).
Due to the wide variety of substrates, it is recommended to carry out a test application under conditions very similar to those of the final application in order to verify the compatibility of the adhesive-coated EPS150ADE paper with the substrate, especially if the latter is slightly grainy.
Aanbevelingen
- Nevertheless, in the case that your project requires the use of several rolls, HEXIS recommend using only a single batch number of each reference.
