HX3000WG2
White
Monomeric Films 3000 Series
gloss 1050 mm 45 m promotional Monomeric PVC
Printable film composed of a 100-µm, calendered, monomeric PVC, which is coated with a pressure-sensitive acrylic adhesive. Structured adhesive for faster application and air evacuation. For solvent, eco-solvent, latex and UV inkjet printing. Glossy surface finish.
Samenstelling & formaat
| Filmtype | Monomeric PVC |
| Dikte | 100 µm |
| Kleeflaag | grey |
| Liner | Liner HEX'Press |
| Breedte (mm) | 1050,1370,1600 |
| Lengte (m) | 45 |
Verwerking
| Toepassing | promotional decoration |
| Ondergronden | windows, signage |
| Oppervlakken | flat |
| Aanbrengmethode | Dry application method |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | promotional |
Technische eigenschappen
| Tack | 17 N/25 mm |
| Hechting (20 min) | 16 N/25 mm |
| Hechting (24 h) | 18 N/25 mm |
| Afpelkracht liner | 0.1 N/25 mm |
| Treksterkte | min. 40 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.8 mm |
Toepassing & onderhoud
- Firmly press the squeegee over all the edges.
- Adhesion to glass, steel, aluminium, PVC, melamine, etc. except grain substrates or substrates coated with acrylic paint.
- In the case of an already painted substrate, apply to undamaged original paintwork only. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- The surface finish of your printings may be modified/improved/protected by applying the appropriate laminate: V700 or V650. For UV printings, use the protective VCR650 laminate.
Firmly press the squeegee over all the edges. - For any application, a sealing varnish may be applied.
Duurzaamheid in detail
- Vertical outdoor exposure on flat surfaces:
Unprinted: 4 years.
