V204EG
White Etched Glass
Etched Glass Films
matt 1230 mm 30 m medium term polymeric PVC
Film composed of 80-µm, calendered, polymeric PVC and coated with a pressure-sensitive acrylic adhesive. Usable for solvent, eco-solvent, latex and UV inkjet printing. White frosted surface finish.
Samenstelling & formaat
| Filmtype | polymeric PVC |
| Dikte | 80 µm |
| Kleeflaag | clear |
| Liner | Liner PET |
| Breedte (mm) | 1230 |
| Lengte (m) | 30 |
Verwerking
| Toepassing | window graphics |
| Ondergronden | windows, light boxes |
| Oppervlakken | slightly curved |
| Minimale aanbrengtemperatuur | +10 °C (+50 °F) |
| Gebruiksbereik | -40 °C to +90 °C (-40 °F to +194 °F) |
| Duurzaamheid | medium term |
Technische eigenschappen
| Tack | 19 N/25 mm |
| Hechting (20 min) | 18 N/25 mm |
| Hechting (24 h) | 23 N/25 mm |
| Afpelkracht liner | 0.3 N/25 mm |
| Treksterkte | min. 25 N/25 mm |
| Krimp (168 h / 70 °C) | < 0.4 mm |
Toepassing & onderhoud
Both the ambient and the substrate temperature must comply with the minimum application temperature.
- Apply to an untreated surface that is clean and free from all traces of contaminants (dust, grease, wax, silicone, etc.).
Particular care must be taken to clean the angles and periphery of the glass surfaces in order to enable the film to adhere properly to the surface.
- Adhesion to glass, steel, aluminium, PVC, melamine, etc. except for granular substrates or substrates coated with acrylic paint.
- In the case of painted substrates, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Aanbevelingen
- For a window glass application, due to a variety of light exposures and conditions, especially when applied with a backlight, it is recommended to perform a preliminary test before each type of application.
- The colour of the films is controlled by HEXIS in order to ensure faithful reproduction of their colour tints. Nevertheless, in the case that your project requires the use of several rolls of the same colour reference, HEXIS recommend using only a single batch number of each reference.
- The surface finish of the prints may be modified/improved/protected by applying the appropriate laminate: V750 or PC500. For UV prints, use the protective VCR750 laminate.
Caution: Applying a laminate can strongly reduce the etched glass surface finish of the V204EG film.
Duurzaamheid in detail
- Vertical outdoor exposure:
Blank: 5 years.
Printed and laminated:
- PC500: 5 years.
- V750: 4 years.
- VCR750: 3 years.
Printed: 2 years.
