HEX860
HEX860 : Application Tape
Transparent Transfer Films
gloss 500 mm 100 m short term polyester PET
It is a transparent, 50-µm polyester film, which is coated with a pressure-sensitive, acrylic adhesive. Intended for transferring printable flex films or plotter films.
Samenstelling & formaat
| Filmtype | polyester PET |
| Kleeflaag | clear |
| Breedte (mm) | 500,750,1000,1500 |
| Lengte (m) | 100 |
Verwerking
| Toepassing | transfer |
| Ondergronden | multi-substrate |
| Oppervlakken | flat |
| Duurzaamheid | short term |
Technische eigenschappen
| Tack | 5 N/25 mm |
| Hechting (24 h) | 3 N/25 mm |
Toepassing & onderhoud
- This tape is especially suitable for transferring:
- flex films for digital printing, such as UFLEX7PV2, UFLEX5S, SILKPRINT, NYLPRINT or BLOCKPRINT,
Caution: Remove the HEX860 tape while it is still hot, immediately after pressing the textile. The adhesion of the HEX860 tape increases as the temperature decreases; a cold removal would therefore be more difficult, even impossible.
- - compounds composed of plotter films + structured laminates, laminates with glitter effect or P6000 films (except for super glossy finishings) or fluorescent films of the F610 series.
Aanbevelingen
- For more information on the application method of the HEX860 tape with textile films, please refer to the Application Guide PRINTFLEX on the "Professionals" pages, category "Films for textile" on the site www.hexis-graphics.com.
