Skärfolie
Fotoluminescens/Efterlysande Folie
Fotoluminescens/ efterlysande
märkning, dekoration & skyltar
- The HEXGLOW01 film is composed of a layer incorporating photoluminescent pigments, which gives it phosphorescent properties that are perfectly observable in the dark.
- Class A (according to DIN 67510-1:2020 standard)
- The DIN 67510 standard is internationally recognised for assessing the phosphorescent properties of a product, in particular the luminance (i.e. the luminous intensity in mcd for a surface of one m²).
- LUMINANCE
- after 5 minutes: 32 mcd/m2
- LUMINANCE
- after 60 minutes: 4 mcd/m2
Färgkarta & referenser
Seriens egenskaper
Vill ni skapa en effektfull och överraskande miljö som syns när det blir mörkt?
Vår nya HEXGLOW01 är avsedd för att skapa budskap som syns i dagsljus men speciellt på natten! Den fotoluminescerande folien HEXGLOW01 har designats för att återutsända ljus.
Den laddar i naturligt eller artificiellt ljus och lyser sedan i mörkret. Denna folie gör det möjligt att erbjuda en lysande effekt, för original inredning eller skräddarsydd skyltning, som är synlig i mörka miljöer (museer, diskotek, POS, butiker, barnrum, mötesrum, parkeringar...)
Sammansättning & format
| Filmtyp | Fotoluminescens/efterlysande |
| Tjocklek | 100 µm |
| Lim | klart |
| Liner | kraft-liner |
| Bredd (mm) | 1230 |
| Längd (m) | 30 |
Montering
| Användning | inomhus |
| Ytor | lätt böjd |
| Lägsta appliceringstemperatur | +7 °C |
| Användningsintervall | -40 °C to +90 °C |
| Hållbarhet | medellång hållbarhet |
Tekniska egenskaper
| Tack | 19 N/25 mm |
| Vidhäftning (20 min) | 19 N/25 mm |
| Vidhäftning (24 h) | 21 N/25 mm |
| Draghållfasthet | min. 35 N/25 mm |
Vit/ljusgrön i dagsljus som blir efterlysande grön i mörkret
Permanent solventbaserat adhesive
100 Micron
Hållbarhet; upp till 3 år inomhus (vertikal applikation)
Tillgänglig i 1230 mm x 30 m (kortrullar enligt tillgängligt lager)
Applicering & skötsel
The film is intended for indoor application.
The film can be cut into simple shapes using a plotter.
It is possible to transfer the film with the HEX904, HEX909 or HEX860 tapes.
Recharge the photoluminescent properties of the film under natural or artificial lighting.
In the case of an already painted substrate, self-adhesive media must only be applied to undamaged original paintwork. If the paintwork is not original and/or damaged, the application and the removal are at the judgement and risk of the installer.
Rekommendationer
The colour of the films is controlled by HEXIS in order to ensure faithful reproduction of their colour tints. Nevertheless, in the case that your project requires the use of several rolls of the same colour reference, HEXIS recommend using only a single batch number of each reference.
Detaljerad hållbarhet
Priser & beställning
Logga in på din kundportal för att se företagspriser.